New Mexico Clay, Inc. We sell Duncan and Mayco paint.  Duncan Paint Store your source for Duncan paint and glaze.    800 781-2529 check your cart

Home
 Discounts
 MaycoPaints  

Shop by
clicking
the links
below.
Products
 Glazes
 Underglazes
Non-fired
 Lusters
 Molds
 Tools
Brushes
 Literature

Guest book
Search
News
Feedback

M.S.D.S.

 Click on the
Duncan Logo 
to see Duncan's
 cool website.Duncan's ceramics and paint Web site

Specialty ProductsAntique Brass cowboy, mold by Doc Holliday Molds Glaze not available but stay tuned

For creating a variety of special effects, including texturing and antiquing looks.

Snow: This fired dimensional product produces billowy white texture that simulates snow. This specialty glaze is used mainly as an accent glaze on Christmas items and to create fun accents on animals and can be applied up to 3/4-inch thick.


Metallic Glazes : This must-have collection of specialty glazes have been favorites of ceramists for years. With these subtle metallics, you'll be able to create the special finishes that make your work unique.Check your Cart
  Make your selections and then press button

Antique Pewter
  SY1024
$3.20  4oz. QTY

SY1024 Antique Pewter fires to shelf cone 06.

Heirloom Silver
  SY1025

$3.20  4oz QTY

SY1025 Heirloom Silver fires to shelf cone 04

Patch-A-Tatch
  SY545

     $3.05  4oz.  QTY

How to use Patch-A-Tatch®

1. Gently scratch crisscross lines on areas to be joined.
2. Using a soft brush, moisten scored areas or broken edges with water. Use the same brush to apply a good coat of Patch-A-Tatch to these areas.
3. Quickly attach or fit the pieces together and hold securely for a few seconds.
4. Brush a little Patch-A-Tatch over the joint and, when set and thoroughly dry, scrape, sand, sponge or otherwise finish, and the piece is ready for decorating or firing.
5. Clean up with water.

 

Snow    SY546

$2.90  4oz QTY

$9.50  Pint  QTY

How to use Fired Snow

1. Stir well to a smooth consistency. Do not add water.
2. Apply heavily to shelf cone 04 bisque. Use a palette knife, brush, sponge, ice cream stick or squeeze bottle. Avoid thin application.
3. Apply over unfired glaze.
4. Fire the shelf cone 06.
5. Clean up with water.
6. Always refer to label instructions for proper application and usage.
Tips & Techniques
1. To obtain a different look, tint or accent Snow with E-Z Stroke® Translucent Underglazes.
2. Fired snow can simulate more than just snow, use it for ocean foam, clouds, etc.

 

This water-based emulsion is formulated to protect design areas or colors, making application of background or adjoining colors faster and easier.
fires off. 

Wax Resist
  SY547

$2.50 2oz QTY

  How to use Wax Resist

1. Shake jar and stir well.
2. Always dampen brush or sponge thoroughly with Duncan Brush Cleaner and squeeze out excess before loading with Wax Resist.
3. Apply 1 good coat of Wax Resist over greenware, bisque, underglaze or glaze.
4. Allow Wax Resist to dry thoroughly before proceeding with technique.
5. Gently remove excess color from resist areas with a dampened sponge before firing.
6. Fire greenware to shelf cone 04.
7. Remove any loose perticles of fired underglaze with stiff brush before glazing. Glaze fire to shelf cone 06.
8. Clean brush in Brush Cleaner and rinse in warm water immediately after use. Wipe rim of jar and inside of lid, then close tightly.

Tips & Techniques

1. For underglaze designs, apply base coat of underglaze color to greenware. Paint design with Wax Resist over base coat. When design is thoroughly dry, apply contrasting color over the ware. Bisque fire to shelf cone 04. After bisque firing, remove loose underglaze particles with a stiff brush before glazing.
2. For glaze designs, paint designs with Wax Resist directly on shelf cone 04 bisque or over 3 coats of dry, unfired glaze applied to shelf cone 04 bisque. When Wax Resist is dry, apply 1 coat of a second glaze color over the ware. Fire to shelf cone 06.

mask and peelMask'n Peel
  AS548

$2.65  2oz QTY

How to use Mask 'n Peel™

1. Always dampen brush or sponge thoroughly with Duncan Brush Cleaner and squeeze out excess before loading with Mask ' Peel to desired areas.
2. Apply one good coat of Mask 'n Peel™ to desired areas.
3. Allow Mask 'n Peel™ to dry thoroughly before applying color over it. Heavy applications of Mask 'n Peel™ tend to dry on the surface before drying underneath. When this occurs, Mask 'n Peel™ peels off in layers. For this reason, any heavy areas should be checked for traces of Mask 'n Peel before proceeding with the technique.
4. When removing Mask 'n Peel™, lift the corner of the masked area with a tool or fingernail, and use fingertips to roll the mask toward the area rather than away from it. In this way, the mask can usually be removed in one peice. However, always check for any small particles that may be left behind.
5. Always use Mask 'n Peel™ in a well-ventilated area.
6. Clean brush in Brush Cleaner and rinse in warm water immediately after use. If Mask 'n Peel™ should accidentally dry in the brush before it can be cleaned, soak in Antiquing Solvent or mineral spirits to loosen residue, then wash in warm, soapy water to complete cleaning. Wipe rim of jar and inside of lid, then close tightly. Tips & Techniques
1. For underglaze designs: Apply base coat of opaque underglaze color to greenware. Paint design with Mask 'n Peel™ over base coat. When design is thoroughly dry, apply contrasting color over the ware. While color is still slightly damp, lift corner of masked area and peel off. Simple design work can be done with just one application of Mask 'n Peel™. More colorful designs can be acheived with additional layers of Mask 'n Peel™ and color (except translucent underglazes) as long as the mask is removed after each color application.
2. For glaze designs: Paint a design with Mask 'n Peel directly on shelf cone 04 bisque or over 3 coats of dry, unfired glaze applied to witness cone 04 bisque. When mask is dry, apply one coat of a second glaze color, then remove mask while glaze is still slightly damp. As with underglazes, successive applications of Mask 'n Peel and 1 coat of glaze can be used.
3. For nonfired color designs, apply Mask 'n Peel™ directly to bisque for protection of areas while applying adjoining colors or apply over a base-coat color. When mask is dry, apply the adjoining or second color, then remove mask while color is still slightly damp. Repeat as desired.
Brush Cleaner
$5.05  8oz  QTY
 

This product is an excellent cleaner and conditioner for brushes.
Modern Brass
List Price: $8.95  Modern Brass NEW!
Qty:               Comes in 8 oz bottle, fire to cone 04. Has an interesting metallic look


Modern brass vase

How to use Metallic Glazes

1. Apply 3-4 flowing coats.
2. Apply to shelf cone 04 bisque.
3. Fire to shelf cone 04. SY1024 Antique Pewter fires to shelf cone 06.
4. Do not fire with greenware or other glazes.
5. Clean up with water.
6. Always refer to label instructions for proper application and usage.

Tips & Techniques

Use these polished metal finishes for solid color or for accenting.
Item Code: SY1026-8
 
Glazes (foodsafe and Non Toxic)   
          Envisions   Courtyard Artglazes  
          Satin Glazes     Crystals & Crackles™   French Dimensions™
 
Other Pages
          [ Products ] [ Glazes ] [ Underglazes ] [ Non-fired ] [ Tools&Brushes ] [ Lusters ]  
          [ Molds ] [ Literature ] [ Search ] [ News ] [ Feedback ] [ Search ]
 

Send mail to sales@nmclay.com   with questions or  comments about this web site.                         click here for our BBB rating
Copyright © 2000-2012 New Mexico Clay, Inc. for duncanpaintstore.com

We are not Duncan Enterprises of Fresno Ca. we are their Distributor.

Click Here for Material Safety Data Sheets on all Duncan Products